Decal Application Instructions

Step  1:  Clean and dry the application surface.
Step 2:  Align the decal where you would like it to be.

 

Step 3:  Lift the decal up and peel the backing paper away from the decal at a sharp angle.

 


Step 4:  Starting from the edge of the decal near the masking tape, wipe down over the transfer tape with a credit card.  Firmly go over the entire decal surface until it is completely adhered to the surface.

 


Step 5:  Slowly and carefully peel the transfer tape from the top of the decal.  Peel the tape at a sharp angle, so you may press on top of the decal as you peel.  If any part of the decal starts to come up with the tape, run over that part of the decal with a credit card and try to peel the tape again.